Asphalt Driveway

Free Shipping on orders $74.95+

Login 0

Your Cart is Empty

Want a sealer that actually works and lasts?

Liquid Rubber Driveway Restore Sealer - Asphalt Driveway Coating

Asphalt Driveway Sealers come in all different shapes and sizes. It depends on what you want. You can buy the lowest cost product and re-do your driveway every year or use a high quality product like the Liquid Rubber Driveway Sealant

Liquid Rubber has developed a Driveway Sealer unlike any other one on the market. It actually has flexibility to help your driveway stay sealed from movement and lasts 5+ years

It's unfortunate that driveways will begin to break down over time. Liquid Rubber Canada offers an easy DIY solution to protect and revitalize your driveway extending the life and value of your investment. For a fraction of the cost, you can add approximately 5 years to your driveway.

Ensure a clean, dry surface by power washing
Degreaser may be needed for oil spots
Fill large cracks and small holes with an appropriate patching material
Prep perimeter and cracks by brushing
Use an 18" Foam Squeegee to spread
Read full Application Guideline in Documents below
See Products Used below

Apply using an 18" foam squeegee or push-broom. (Use a
6- 12" brush for edges.)
Apply to dry surface that is free of dirt, loose paint, rust, oil, grease, coal tar, silicone, or other contaminants.
Apply when temperature is above 5ºC/41°F and rising.
Use Liquid Rubber Deck and Patio Cleaner to clean.
Apply each coat in an alternate direction to the last coat to ensure even coverage.
Apply final coat in the direction of slope for positive drainage.
Apply next coat when dry to the touch with nothing wet underneath and is uniform in color. (typically 12 hours)
Avoid hot, direct, intense sun when applying.
Avoid contact with solvents and solvent based cleaners, adhesives, and paints.
Do not allow to freeze.
Do not apply in wet conditions (including fog and dew) or if rain is forecasted within 24 hours.
Curing time depends on temperature, humidity and airflow.
Initial cure(set) within 48 hours or until completely dry and drivable.
Full cure in 5-7 days.
Make sure what you’re coating is at least 5 degrees above the dew point of the environment you are coating in. (See technical specs for more details)
For best results remove existing paints/coatings and apply directly to the substrate. (Some paints and coatings will not be compatible. Loose/flaky paint may be an indication that the existing paint/coating is not well bonded and therefore your Liquid Rubber solution may fail if applied over it instead of directly to the substrate. Oil based paints, enamels, epoxies, powder coats can be difficult to bond to. Contact your Liquid Rubber technical representative for further direction.)
Wrap brushes in plastic and refrigerate to use for next coat.
Remove painters tape/blocking while coating is still wet.
Dust or dirt can cause loss of adhesion.
Apply the next heavy coat when the product is dry to the touch and nothing is wet underneath. Tacky is ok.
Use up all required material to ensure a long lasting membrane.

Apply a minimum final thickness of 5 gallons per 250 sq ft (23.2 sq/m). It should require around 2-3 heavy coats.

Asphalt Driveway Restoration - Liquid Rubber Driveway Restore Sealer
Watch the video

Liquid Rubber Driveway Restore Sealer Application Guideline

PRODUCTS USED FOR Asphalt Driveways

We believe everyone should have a choice to buy high quality, environmentally friendly products. We believe you should have a choice to do your own projects (most of the time you can do it better yourself than hiring someone) and save money. We believe in Free Shipping (over $75) and Free Returns. We believe in making your experience the best it can possibly be. Please, please reach out to us with any questions. We want to make your project a success.

Flexible Heavy-Duty Coating

ENVIRONMENTALLY FRIENDLY - Liquid Rubber Driveway Restore Sealer is water based, containing no Solvents or VOC's. This means it's safe to use with no special breathing apparatus like solvenated products need. You're safe, your children are safe and your pets are safe. We believe you should have a choice in purchasing high quality products that are safe for you and the environment
USED FOR: Revitalizing your aging, weathered asphalt driveway
See ASPHALT DRIVEWAY APPLICATION page for more specific info
EASY TO APPLY - Basically just like painting except you use heavy coats to build up your waterproof membrane. Open the container and start using. You can close the container and use later if you have left over material. No pot life or working time like 2 component products.
Apply by Brush, Roller or Foam Squeegee.
HIGHLY FLEXIBLE - UV Stable - Driveway Restore will withstand weathering and not degrade due to UV.

Asphalt Surface

Apply a minimum final thickness of 1 gallon per 50 sq ft (4.65 sq/m). It should require around 2-3 coats.

Tips

Apply using an 18" foam squeegee or push-broom. (Use a
6- 12" brush for edges.)
Apply to dry surface that is free of dirt, loose paint, rust, oil, grease, coal tar, silicone, or other contaminants.
Apply when temperature is above 5ºC/41°F and rising.
Use Liquid Rubber Deck and Patio Cleaner to clean.
Apply each coat in an alternate direction to the last coat to ensure even coverage.
Apply final coat in the direction of slope for positive drainage.
Apply next coat when dry to the touch with nothing wet underneath and is uniform in color. (typically 12 hours)
Avoid hot, direct, intense sun when applying.
Avoid contact with solvents and solvent based cleaners, adhesives, and paints.
Do not allow to freeze.
Do not apply in wet conditions (including fog and dew) or if rain is forecasted within 24 hours.
Curing time depends on temperature, humidity and airflow.
Initial cure(set) within 48 hours or until completely dry and drivable.
Full cure in 5-7 days.
Make sure what you’re coating is at least 5 degrees above the dew point of the environment you are coating in. (See technical specs for more details)
For best results remove existing paints/coatings and apply directly to the substrate. (Some paints and coatings will not be compatible. Loose/flaky paint may be an indication that the existing paint/coating is not well bonded and therefore your Liquid Rubber solution may fail if applied over it instead of directly to the substrate. Oil based paints, enamels, epoxies, powder coats can be difficult to bond to. Contact your Liquid Rubber technical representative for further direction.)
Wrap brushes in plastic and refrigerate to use for next coat.
Remove painters tape/blocking while coating is still wet.

Liquid Rubber Driveway Restore Sealer

$135.95

We believe everyone should have a choice to buy high quality, environmentally friendly products. We believe you should have a choice to do your own projects (most of the time you can do it better yourself than hiring someone) and save money. We believe in Free Shipping (over $75) and Free Returns. We believe in making your experience the best it can possibly be. Please, please reach out to us with any questions. We want to make your project a success.

Flexible Heavy-Duty Coating

ENVIRONMENTALLY FRIENDLY - Liquid Rubber Driveway Restore Sealer is water based, containing no Solvents or VOC's. This means it's safe to use with no special breathing apparatus like solvenated products need. You're safe, your children are safe and your pets are safe. We believe you should have a choice in purchasing high quality products that are safe for you and the environment
USED FOR: Revitalizing your aging, weathered asphalt driveway
See ASPHALT DRIVEWAY APPLICATION page for more specific info
EASY TO APPLY - Basically just like painting except you use heavy coats to build up your waterproof membrane. Open the container and start using. You can close the container and use later if you have left over material. No pot life or working time like 2 component products.
Apply by Brush, Roller or Foam Squeegee.
HIGHLY FLEXIBLE - UV Stable - Driveway Restore will withstand weathering and not degrade due to UV.

Asphalt Surface

Apply a minimum final thickness of 1 gallon per 50 sq ft (4.65 sq/m). It should require around 2-3 coats.

Tips

Apply using an 18" foam squeegee or push-broom. (Use a
6- 12" brush for edges.)
Apply to dry surface that is free of dirt, loose paint, rust, oil, grease, coal tar, silicone, or other contaminants.
Apply when temperature is above 5ºC/41°F and rising.
Use Liquid Rubber Deck and Patio Cleaner to clean.
Apply each coat in an alternate direction to the last coat to ensure even coverage.
Apply final coat in the direction of slope for positive drainage.
Apply next coat when dry to the touch with nothing wet underneath and is uniform in color. (typically 12 hours)
Avoid hot, direct, intense sun when applying.
Avoid contact with solvents and solvent based cleaners, adhesives, and paints.
Do not allow to freeze.
Do not apply in wet conditions (including fog and dew) or if rain is forecasted within 24 hours.
Curing time depends on temperature, humidity and airflow.
Initial cure(set) within 48 hours or until completely dry and drivable.
Full cure in 5-7 days.
Make sure what you’re coating is at least 5 degrees above the dew point of the environment you are coating in. (See technical specs for more details)
For best results remove existing paints/coatings and apply directly to the substrate. (Some paints and coatings will not be compatible. Loose/flaky paint may be an indication that the existing paint/coating is not well bonded and therefore your Liquid Rubber solution may fail if applied over it instead of directly to the substrate. Oil based paints, enamels, epoxies, powder coats can be difficult to bond to. Contact your Liquid Rubber technical representative for further direction.)
Wrap brushes in plastic and refrigerate to use for next coat.
Remove painters tape/blocking while coating is still wet.

Liquid Rubber Driveway Restore Sealer

Call Us

1-855-592-1049

Chat With Us

Live Chat

Email Us

sales@liquidrubber.ca

Shop Products

VIEW ALL PRODUCTS

Shop By Project/Application

VIEW ALL PROJECTS

Want a sealer that actually works and lasts?

PRODUCTS USED FOR Asphalt Driveways

Liquid Rubber Driveway Restore Sealer

Subscribe