Deck and Docks - Liquid Rubber Cool Foot Coating

Liquid Rubber Cool Foot Coating is a liquid applied coating that reduces heat transfer from the surface to your foot. This product is water-based and provides a durable, protective membrane. There are no solvents or VOC's and is non-toxic. Color options available.

This product is applicable for Deck & Dock Boards.

Steps

Ensure a clean, dry surface. Use Liquid Rubber Deck & Patio Cleaner for wood or Liquid Rubber Concrete Etch for Concrete
Use 1 coat of Multi-Purpose Primer to increase adhesion and act as a moisture vapor barrier to prevent peeling. Apply Liquid Rubber Cool Foot Coating when Primer is dry - tack free (up to 6 hrs) and within 24 hrs.
Apply a minimum of two heavy coats to achieve required thickness. 20 mil (0.76 mm) Dry Film Thickness
Apply the next heavy coat when the product is dry to the touch and nothing is wet underneath. Tacky is ok
COVERAGE - Apply minimum final thickness of 1 gallon per 40 sq ft (3.7 sq m). It should require around 3-4 heavy coats. High traffic areas require 1 gallon per 30 sq ft (2.8 sq m).
See below for products used

Tips

Dust or dirt can cause loss of adhesion
Apply the next coat when the product is dry to touch
Apply material until you use up the required amount
Use a roller or brush to apply. Can be sprayed with a good quality textured paint sprayer
Apply above 10C (50F)
Brush products between deck boards
Curing time depends on temperature, humidity and airflow
Not meant for ponding water environments
Do not apply later in the day if Dew is forecast

Shop Products

VIEW ALL PRODUCTS

Shop By Project/Application

VIEW ALL PROJECTS

Deck and Docks - Liquid Rubber Cool Foot Coating

Steps

Tips

Videos

Subscribe