Sealing Concrete or Wood - Liquid Rubber Polyurethane Clear Coat

There are many projects that require a transparent, yet durable, waterproofing solution to maintain the beauty of a decorative finish. Liquid Rubber Polyurethane Clear Coat was designed to meet those needs and provide a beautiful “wet look” while protecting and sealing.

Projects Include

Wooden Decks
Landscape Borders
Exposed Aggregate Finishes
Unsealed Colored Concrete on Porches/Walkways
Unsealed Stamped Concrete on Porches/Walkways
Unsealed Concrete Pavers
Brick and Cinderblock

Steps

Test an inconspicuous area for discoloration prior to full application
Clean the areas with Liquid Rubber Deck and Patio Cleaner
For concrete surfaces, etch with Liquid Rubber Concrete Etch
Power wash to ensure a clean surface, allow to fully dry
Apply an even coat of Liquid Rubber Polyurethane Clear Coat
Apply with brush, roller or spray
Apply the next coat when the product is dry to the touch
Minimum 2-3 coats
Coverage -Approximately 150 sq.ft. - 300 sq.ft. per 1G (3.78L). Depending on porosity and profile
See below for products used

Tips

Dust or dirt can cause loss of adhesion
Apply material until you use up the required amount
Apply above 10C (50F) and rising
Curing time depends on temperature, humidity and airflow
Avoid application if rain or dew is forecast within 24 hrs
Apply next coat(s) as soon as possible not allowing extended time between if possible

Shop Products

VIEW ALL PRODUCTS

Shop By Project/Application

VIEW ALL PROJECTS

Sealing Concrete or Wood - Liquid Rubber Polyurethane Clear Coat

Steps

Tips

Videos

Subscribe